Question: What Is The Difference Between M6 And M8 Bolts?

What size bolt is an m8?

M8 is the designation for a metric (M) sized bolt or screw that is 8mm (8) in diameter.

This is roughly equivalent to a 5/16 bolt or screw..

What does the M mean on bolts?

The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

Are m10 and 3/8 the same?

Since 10 mm is bigger than 3/8″, the simple answer is, “NO”. But you CAN drill the hole out to either 25/64″ (for 3/8-24) or letter “X” (. 397″)( for 3/8-16), and tap for a Helicoil.

What does m8 mean on a bolt?

The M8 will measure about 8 mm in diameter, more likely, just a touch undersize, (. 31496″) The M10, about 10 mm in diameter, (. 3937″) and the M12 about 12 mm in diameter, (. 4724″). The “M” designates the bolt is Metric and the number after the M indicates the size.

What size is m6 bolt?

The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

How can you tell if a bolt is metric or standard?

Telling the difference between a metric and imperial bolt is easy. If the bolt has lines on the head its standard or imperial. If the bolt has numbers on the head then its metric. These markings indicate how strong the bolt is they call this tensile strength.

Is an m6 bolt 6mm?

M6 refers to a metric 6mm screw. The outside diameter of the threads is 6mm. … M6 screws are commonly used by HP. You can identify an M6 screw by measuring the diameter with a ruler at slightly more than 7/32″ (0.228″).

What size hole do I drill for a m6 bolt?

Metric ThreadsThreadDrill size for tapping standard metric threadsClearance holeM43.34.5M54.25.5M656.6M86.8920 more rows

What size bolts do I need to mount my TV?

Replacement wall mount screwsFor TVs 19 – 22 inches, the screw size is M4.For TVs 30 – 40 inches, the screw size is M6.For TVs 49 – 88 inches, the screw size is M8.

What is m6 in standard?

M6 refers to a metric 6 mm screw. … The standard metric rack screw is actually an M6 x 0.1 mm. The number 0.1 mm refers to 0.1 threads per millimeter. You can identify an M6 screw by measuring the diameter at slightly more than 7/32″ (0.228″).

What are standard bolt sizes?

Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.

What is a m6 screw?

M6 refers to a metric 6mm screw. The outside diameter of the threads is 6mm. … The number “1mm” refers to 1 threads per millimeter. M6 screws are commonly used by HP. You can identify an M6 screw by measuring the diameter with a ruler at slightly more than 7/32″ (0.228″).

Is m6 bigger than m8?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”)….Table 3.MetricClosest InchM6-1.01/4-28 (Larger)M7-1.01/4-28 (Smaller)M8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)16 more rows

What does m8 1.25 bolt mean?

For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.

Is an m8 bolt 8mm?

M8 is the designation for a metric (M) sized bolt or screw that is 8mm (8) in diameter. This is roughly equivalent to a 5/16 bolt or screw.

How long is a m8 screw?

Table 3.MetricClosest InchM8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)M12-1.751/2-13 (Larger)M14-2.09/16-12 (Larger)16 more rows

How much weight can an m8 bolt hold?

SizeGrade 8.8Grade 10.9M82,120kg3,040kgM103,370kg4,810kgM124,890kg7,000kgM169,100kg13,000kg5 more rows