Question: Is A Stainless Steel Bolt Stronger Than A Grade 8 Bolt?

What does 10.9 mean on a bolt head?

The grade 8.8 refers to the tensile strength which is generally 116,000 psi, grade 10.9 is generally 150,000 and grade 12.9 is generally 175,000 psi..

Are stainless steel bolts stronger than high tensile?

Stainless steel has a low carbon content which cannot be hardened, and regular steel is slightly stronger than grade 2 steel, and at the same time it is significantly weaker if compared in the terms of hardness. Both steels can have magnetic properties, but stainless steel is usually nonmagnetic.

How can you tell if a bolt is Grade 5?

Grade 5 bolts are case hardened, meaning the bolt has been heated enough to hardened the outside of the bolt but not enough to harden the inside portion. Grade 5 bolts are identified by 3 evenly spaced radial lines on the head.

Are Grade 8 bolts brittle?

A Grade 8 has a very high tensile strength, but can be brittle. In applications such as suspensions, a very high number of load/unload cycles can produce work hardening, which produces an immediate, or catastrophic failure.

What grade bolt has the highest shear strength?

12.9 Bolt Shear Capacity12.9 Bolts. A 12.9 bolt is one of the highest grade of bolts produced. Known for their high tensile strength, they are built with both hex and Torx heads and are available in zinc or chrome finishes. … 12.9 Shear Strength. The minimum tensile strength of a 12.9 bolt is 1220 MPa.

Is a 10.9 Bolt stronger than Grade 8?

A tempered medium carbon steel. Class 10.9 is stronger than class 8.8. It is commonly found in high strength automotive applications. Class 10.9 is similar to grade 8.

Is stainless harder than Grade 8?

Stainless steel bolts are rated for corrosion resistance. Bolt strength is rated in PSI (pounds per square inch). A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.

What is the difference between a 10.9 and 12.9 Bolt?

12.9 grade steel has 120% of the tensile strength of 10.9 grade steel. The “12” prefix indicates a tensile strength of X100 N/mm^2 and the “9” suffix indicates a multiplier. Both 12.9 and 10.9 have the same multiplier, so the comparison is straightforward: 12 to 10.

Is a 12.9 Bolt stronger than Grade 8?

Property class (often just “class”) specifies metric fasteners. Special markings on screw heads and nuts identify the fastener’s grade….Table 1.Grade/ClassStrengthMetric Class 8.8Similar to Grade 5.Metric Class 10.9Similar to Grade 8.Metric Class 12.9The highest metric class for strength, it exceeds Grade 8.11 more rows

What are Grade 5 bolts used for?

Grade 5 bolts are hardened to increase strength and are the most common bolts found in automotive applications. Grade 5 bolts have 3 evenly spaced radial lines on the head. Grade F is roughly equivalent to Grade 5. Grade F nuts are used with Grade 5 bolts.

How can you tell if a bolt is high tensile?

To identify this grade, look out for an ‘8.8’ stamp or a set of three radial lines on the head of the bolt. Most often, customers looking for a high tensile bolt may just be looking for the 8.8 grade.

Do stainless steel bolts have a grade?

18-8 stainless. These are typically heated up to about 650 degrees when they’re treated. They can range anywhere from a grade two to a grade five depending upon the manufacturer. This is a grade 316 stainless which is typically the fastener of choice in corrosive environments.

What type of steel is a Grade 8 bolt?

Strength Differences A325 bolts are typically manufactured from a medium carbon steel (although they can be made from an alloy) while SAE grade 8 bolts are made from a medium carbon alloy steel.

What is the hardest bolt you can buy?

BUMAX® Ultra – the world’s strongest bolt Since its launch in 2014, the BUMAX® Ultra range has proven that it is capable of exceeding tensile strengths of between 1 500 to 1 700 MPa on various applications, with good corrosion resistance and an operating range of between -50 and 400°C.

Is 304 or 316 stainless better?

The most basic difference between grade 304 and grade 316 stainless steels is that 316 tends to have more nickel and a bit of molybdenum in the mix. … Though the stainless steel 304 alloy has a higher melting point, grade 316 has a better resistance to chemicals and chlorides (like salt) than grade 304 stainless steel.

What is the hardest grade bolt?

The strongest commercial-quality bolt is grade 8, marked by six raised dashes; its medium-carbon alloy steel has been quenched and tempered to achieve a tensile strength of 150,000 psi.

What grade are Home Depot bolts?

It’s virtually identical in terms of chemical and physical strengths and properties as an SAE Grade 5 bolt. No matter the types of bolts you need for your home or mechanical project, The Home Depot has the bolts, washers and nuts you need for a secure fit.

What does 12.9 mean on a bolt?

12.9 grade steel means that a component manufactured form this grade of steel has 12X100 N/mm^2 tensile strength and 9 is a multiplier means 90% of 1200 = 1080 N/mm^2 is the yield strength of the grade. Similarly we also have grade 8.8 , 10.9 , 6.8 also.

Will Grade 8 bolts rust?

Grade 8 bolts have 6 evenly spaced radial lines on the head.” Unlike stainless steel, which is highly resistant to corrosion, steel, however reinforced, will oxidize over time and rust. Grade 8 bolts that are not galvanized or plated with yellow zinc, however, are cheaper.