# Question: How Do You Change Negative Ground To Positive Ground?

## How do you convert 6v to 12v?

Converting 6v Power Wheels to 12v With Dual GearboxesStep 1: Remove Stock Wiring Harness.

First thing you’ll need to do is remove the stock wiring harness.

Step 2: Bench Test Replacement Wiring Harness.

You’ll need a 12v wiring harness obtained from a donor BPRO.

Step 3: Fit 12v Harness to Chassis.

Step 4: Modifiy and Install Rear Axle.

Step 5: Finish Assembly..

## What is positive ground and negative ground?

Ground is an arbitrary reference point you can choose wherever you want. All other potentials in the circuit are measured relative to ground. So by definition, ground is at 0 potential and it is neither positive or negative.

## What is a positive ground connection?

Quick Answer. A positive ground system works by directly connecting the chassis of a vehicle to the positive side of the vehicle’s battery. This system effectively earths the vehicle as the chassis attaches to the battery using a positive battery cable.

## Is Earth Ground positive or negative?

Atmospheric electricity is always present, and during fine weather away from thunderstorms, the air above the surface of Earth is positively charged, while the Earth’s surface charge is negative.

## How do you convert 6v positive ground to 12v negative ground?

If you are 6v positive ground going to 12v negative, you need to switch the two wires on the coil. Negative to positive, positive to negative. For a 12v negative system, the ignition switch wire goes to the + terminal on the coil. The wire from the distributor to the coil goes to the – terminal on the coil.

## How does a positive ground system work?

A positive ground system works by directly connecting the chassis of a vehicle to the positive side of the vehicle’s battery. This system effectively earths the vehicle as the chassis attaches to the battery using a positive battery cable.

## Why did cars have positive ground?

Originally, the voltages on the wires were positive with respect to earth. … Then engineers discovered that with positive voltage on the copper wires, copper wires age quickly, due to electrolysis. With negative voltage on the wires, in respect to earth, (called positive ground) the copper is protected from corrosion.